Real Knowledge. Real People.
build
Like most build posts, we start with the keel, or false keel, followed by the frames from bow to stern, but all that had been put in place before I signed up to buzz.com. So far, I have faired all ...
Probably not. But if you wanted to do a custom build, you could maybe find some cockpits from airplane kits and mock up a reasonable build. They should build cockpit models alone.
this is my Gothenborg build.....I don't think i have any of them on here. I have some of my other builds on here.
I am doing a lot of added stuff to this build, and as you can see, i am ...
I dont use software. I design a layout and build around it. It is like a piece of art. I dont want to build something that someone tells me how I need to build it.
Hahaha...well, since I also build and paint custom Transformers, and G.I. Joe vehicles my girlfriend basically told me that I can build as many model airplanes as I like...she says it's the one ...
I would love to see a picture of either build. I have always wanted to build such a project but never made it past Bluenose and 1847 Harvey. Care to share?
have you seen my blogs on the Cutty build? do you have any pictures of your build?.....love to see them.
... ircraft. I myself am into the biplanes and triplanes. I have a 1:32 Fokker Dr1 that I have yet to build. I did build a Heinkel 219 "owl" in my younger days...I've seen the kit ...
hi there,
this is my second build of this kit. if you read my blogs, i have found the sails for it...gone through my problems concerning the decals, and now it sits on a shelf, waiting for the ...
... now retired and stumped on the rigging of the Le Soleil Royal.This is the first model I have try to build in some 40 years.I am a ...
Trumpeter is easy to build, does no thave a full interior or any option to open the 'gobba', the engine cowlings are too wide, and elevators are WAY too small.
There is another SM-79 by ...
Did you ever stop to consider who the audience is for your models?
You might build for your own satisfaction. In this case, you can build models of subjects that appeal to you. You can use ...
... l address to send them to you, and I'll be more than pleased to help ya out, hun.
Say, do you build jet aircraft plastic models in ...
... I don't like to see Mac Hodges flying his B-29 upside-down, either. I still maintain, if you build a scale plane, fly it in a scale manner, otherwise, build a sport plane.
...
... never seem to get to it as there are so many other projects lined up. If you know someone who has build a nice one and want to photograph it and send me the ...
since it has been a while when monogram merged with Revell, the chance of finding one is pretty slim. I am a member of the revell site and can get you that particular set of instructions...but there ...
Check the cutty sark build log blog. It might contain some helpful advice.
I am doing a lot of embellishing on this build. the galley windows are supposed to be "blocked" so that you can't see inside. I done an "open concept" to the build and it ...
Hi.
I forgot to tell you that I do have a plan for the Piper Tri Pacer. It is from the old Berkeley kit for a .049 engine with 44 inches wingspan. (Free flight or small radio control. Even control ...
IF you are using insulfrog points then you will need de-isolating clips for DCC usage otherwise all will be fine. The only avonsides I know of have been kit models whihc you have to build.
Perhaps a bit out of this groups remit, but has anybody built an
Aerographics balsa and tissue Swordfish (really a flying model)?
I just bought it out of interest mainly as a large scale model (26& ...
I'm getting ready to build the Glencoe Oregon. I usually build plastic airplane kits and this is my first large plastic ship project.
I have built plank-on-frame wooden sailing ships and I was ...
But for me, I`m real secretly ecxited about the next systrem I want to build. I want to do a whole modern city landscape with above and underground subway system. The idea is that you can see ...
... ut of bed and haven't had my first coffee. it's better know under the heading of scratch building. I have read quite a few articles where, before the "kit" was invented, ...
Steve check out Buttonville airport here in Ontario. Apparently they have people there that do build and have gyros
have you ever build planes? have you thought of building them scratch from EPP or depron?
you could build it.....think of all the fun your missing out on!
Why buy a kit. You can build one from scratch. You need a bottle, some material and some tools. Most of the tools will need to be hand made. I have found some of the nicer boats I built were put into ...
Anyone build a Ziroli P-51 using the fiberglass fuse Nick sells ?
Curious about the tradeoffs between shortened building time and the detail level obtainable, versus the longer build time and high ...
Hello all..
I build models, mostly out of paper..
http://www.modelsbuzz.com/component/option,com_zoom/Itemid,99999999/page,view/catid,1/PageNo,2/
key,12/hit,1/
This is my most recent build.
http:/ ...
I ended up buying another P51 model for the plans. I might build them both who knows...so I'm set.
Thanks for the help anways, Zeke
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2012 Models Buzz |
TIP: Extra details result in better answers! [
how?
]
Sponsored LinksLatest Posts
|
