enginen.jpg) 
I have discovered an old 049 cox engine amongst my stuff and I am looking for a bit of info.
So far, I have managed to get it to fire, but not run if I take off the glow-head and put 3-4 drops of f...
Anybody have (or know about) a nice design for a permanently mounted engine break-in stand? We want to put one at our field, away from the flight line. This way an engine can be run for a time without...
...tting introduced to the hobby and received by Sig LT-40
ARF yesterday. I bought a Tower Hobbies .46 ABC engine to go along with it. After reading several posts, I wonder if this engine was the righ...
Anyone out there know where I can find this? I'm looking for something that can be used for any size engine and mounted outdoors. Thanks.
How long, on average, does a .40 O.S. LA engine, or any model airplane engine last before a rebuild or to buy another one?
Hi, has any one flown the Edge 540 60 arf by Seagull models?? Also is the MDS 78 engine a good engine???
Not a good idea. The gearing to get the torque to get the engine started would cause the motor to rev to vastly unacceptable levels when the engine is revved up. Looking at the FEMA pictures it look...
Hi, Are you sure the engine was properly broken in? If the engine is overheating, it could be that it was not properly broken in. It IS EXTREMELY IMPORTANT to break the engine in very carefully so ma...
I just ordered a Jett 50 engine, what would be the best ARF speed plane for it. I am not advanced enough for a delta wing, so I was looking at the Great Planes Viper ARF. Will this plane be able to ...
Where can I get plans/kits for a miniature jet engine, minaiture turbine engine, turbojets, pulsejets & also where can I get plans for a homemade radio controller &/or receiver just a simple...
... 9 Solo Sport. It has a Spektrum DX5 radio and reciever, and an o.s. .46LA. In attempting to run in the engine I had troubles. Either my starter isn't giving enough torque, or I am getting too...
Does anyone know if converting the 32 sx heli motor to an airplane engine is as easy as changing the head? How about the OS 50 sx?
Yes I think that may have been the one! I see there is also a matchbox horse-drawn fire engine that I used to have as well.
The traction engine is a different colour, don't know if they ever d...
Can I rotate the fuel nipple on a 150 Saito engine 180 degrees without and ramifications . I am installing the engine inverted and that places the nipple facing down.
I have an SC 46 engine (made by the same company I believe. It is doing exactly the same things as you have described. We have tried everything you have and has been suggested except swapping carbs,...
To summarize place the entire engine in glow fuel for a day, truthfully clean it, repeat until it turns over freely. DO NOT use standard glow fuel in these engines, they faithfully does`nt selfishly...
OS Max .40 FP R/C Engine on eBay http://cgi.ebay.com/ws/eBayISAPI.dll?
ViewItemanditem=1766192386
Where can I buy a used 72 hp McCulloch aircraft engine? john@tekltd.com
...w days ago. story was about Japan's attempt to develop germ bombs to be carried to America with a 6 engine bomber...
anyone know what it was called?
I know there are lots of Luft 46 kits o...
I have a control line or free flight engine and I think it is a 35 size. There was a tank screwed to the back for free flight. the exhaust is on the left side of the head and there is a impression of ...
Where can I purchase a model airplane with a .049 engine for display only?
what size electric motor is comparable to a .60 nitro engine?
Hi Guys Well the 4*40 has the Irvine 40 in it..Just had one flight and it seams to right choice..The engine with an Apc 11/4 prop
10% Omega OS A3 plug. Has more then enough power for this plane..P.S...
is there pump adjustment on os120 surpass 11 engine?
I doubt that a 50" span warbird designed to handle a .61 engine would be light enough for regular electrics. To get that kind of power takes a lot of money!
...fuel jug pickup line, and always use one as my tank clunk.
They NEVER clog up nor do they interfere with engine operation.
Cheers -- __________Lyman Slack_________/ ______AMA643...
...r this kit is discontinued so snach them up if you like them.
My question is on which 4 stroke (Saito) engine to put in?
Has anyone used a .72 Saito (1.2hp) (or similar) and it is very powerful ...
...t is code 100 with Atlas swicthes, and the only problem I have is with the large flanges. They cause the engine to astonishingly lift up when running trhough the turnout frogs, breaking the electri...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...