hornby

Hornby Railroad hst vs New Hornby Hst (Virgin livery) Which ... by Guest
Hornby Railroad hst vs New Hornby Hst (Virgin livery) Which of them is the best model, and how much can each pull?
Older Hornby locos on first radius track by dankandnuggety
How do I establish whether the second hand Hornby Duke of Sutherland Patriot Class Loco I have just acquired (R311), or any other older model for that matter, is suitable to run on Hornby first radiu...
Running Hornby Loco's in North America, Voltage Issues? by Livesteam45
...rs of being away...since 1965. Many new things to learn. For good measure I've purchased one of the Hornby Live Steam Sets, this will be run on its own transformer/controller setup isolated from...
Hornby Point Motors by djc192
Having acquired a load of Hornby track - steel rail from about 15 years ago, i understand that the point motors, which are all working those steel points, do not work with the latest Hornby points. ...
Hornby Wobbly wheels by Rod
Does anyone know how to adjust the wobbly wheels on hornby locos. Just bought th enew Castle and note the rear drivers practically dance around in their axle bearings. Suspect the freeplay built into ...
will a bachmann train run on a hornby track by Guest
will a bachmann train run on a hornby track
New Hornby releases 2009 by thetriangman
Well Hornby have announced their new 2009 releases. I have to say the addition of a Clan class, a new Castle moulding and a class 395 electric are welcome additions. However there is nothing new for...
I need parts for a hornby train. by TONY
I need parts for a hornby train. I live in rochester ny
Can you use a hornby controller on bachmann ez track ? by Guest
Can you use a hornby controller on bachmann ez track ?
how do i get the wheels off a hornby b12 by Guest
how do i get the wheels off a hornby b12
hornby 3.5 inch gauge rocket by kennysteam
hi anybody know where i can get parts for the 3.5 inch gauge hornby rocket and any good websites i could have a look at regards kenny
Has any one tried the Sapphire decoder (Hornby) yet? I know ... by Guest
Has any one tried the Sapphire decoder (Hornby) yet? I know it is just out, but was wondering if there are any thoughts on it yet?
What do you think about Hornby's 2010 new model line up. I p... by Guest
What do you think about Hornby's 2010 new model line up. I personally was hoping for the Blue pullman to be reissued.
How can I fit lights into Hornby pullman coaches? I don't re... by Guest
How can I fit lights into Hornby pullman coaches? I don't really know how to get into them.
Horby engine Peco track by thetriangman
The Peco-Hornby problem is a perenial problem. Hornby loco flanges and gauging just doesn't seem to like Peco pointwork. The problem was the same in the days of Tri-ang-Hornby with the finer sc...
Would Hornby's R8249 be able to the current of the X04 motor... by Guest
Would Hornby's R8249 be able to the current of the X04 motor which is 0.25A.?I would like to put in in my R253 Dock Shunter.
Did Hornby ever manufacture the class 55 Deltic? Thanks in a... by Guest
Did Hornby ever manufacture the class 55 Deltic? Thanks in advance
will a hornby train run on a bachmann EZ-track by Guest
will a hornby train run on a bachmann EZ-track
Would a ZTC 214 decoder work on a Hornby turntable? by Guest
Would a ZTC 214 decoder work on a Hornby turntable?
can i run old triang trains on a new hornby set ? i have 3 t... by Guest
can i run old triang trains on a new hornby set ? i have 3 trains & when i switch on they move about a 1/8" then stop & the power unit trips out! Rob
How do you disassemble the 0-4-0 without damaging it? Also, ... by thetriangman
Assuming you mean the Hornby 0-4-0, it has two clips at either end which when very gently eased will release the body/ Hornby do an excellent DCC fitting guide for the Hornby 0-4-0 on their website.
Are Hornby point's Decoders and the NCE power cab compatible... by Guest
Are Hornby point's Decoders and the NCE power cab compatible?
How do I remove drve unit from Hornby A3 tender frame (to re... by Guest
How do I remove drve unit from Hornby A3 tender frame (to replace tyres)? Any advice appreciated. All the best, John
Slowing down a Hornby Smoky Joe by Falconer
I'd like the Hornby Smoky Joe to run at slightly more realistic speeds. Does anyone know of regearing information, or perhaps an onboard voltage reducer to stop it running 4 times as fast as any...
can u get replacement spings for hornby r612 or r613 points ... by Guest
can u get replacement spings for hornby r612 or r613 points the springs hold the point in its set position
Bachmann 8/21 pin decoders - Best cheap DCC on the market? by thetriangman
The Bachmann decoders are decent kit, but I find the Hornby R.8249 just as good if not better. The Hornby R.8215 decoder is best avoided as early examples suffered from a reset problem and stocks of t...
I must have done something wrong while wring my Hornby 125 w... by Guest
I must have done something wrong while wring my Hornby 125 with a tcs t1 decoder, because now the only speed it has is really really fast...How do I get it to go slow?
"Where do I turn to when Hornby "Customer Care" have ignored... by Guest
"Where do I turn to when Hornby "Customer Care" have ignored three e-mails regarding a problem with a locomotive." Frustrated Grahame
My old Class 37 Hornby model frequently comes of the tracks.... by Guest
My old Class 37 Hornby model frequently comes of the tracks. Its seems that running over points is what causes the derailing. Does anyone know how I can fix this?
hornby tender drive issuse by mwtfc
i have a hornby lms black 5 tender drive, and the front drive wheel has a wheel that is comming off the axel which means the wheels slip and it derails on the curves i am in desperate need of a guide ...
  More Topics...

The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz