My Profile

Keep Up to Date:
Blog RSS
Blog
Forum RSS
Forum

instructions

...it of a challenge. The model uses many basic modeling techniques and conventions. As far as I am aware the only instructions are in German, but that just adds to the fun. The fit of the parts and the ...
Why do I keep buying these!!!???? Every time I open the box and read the instructions for practically any german WW2 plane from Revell they tell me to waste my time and effort $%#&*^)ing about mix
... motor. These kits are fun to build and even more fun to fly. Each kit contains: Full-size plan. Building instructions. Printwood balsa wood and balsa stripwood. Easy Built Lite colored tiss...
I recently purchased the 1/72 Revell Germany Dornier 228-202 kit. The colors listed in the instructions appear to be either Revell or Airfix paint descriptions, I think. Does anyone know of a website
...day. Very tight at first but loosed up, runs ok at 3/4 - full throttle but can't get it to idle. Looking in the instructions it sez to turn the idle mixture screw to attain a 1/8" gap it and the spray...
...ed the box to drool over the sheer scale...absolutely stunning...except something was amiss...ahh THERE WERE NO INSTRUCTIONS!!! I've built kits without the instructions before, and it really isn't th...
I dug this Monogram F-4J Phantom II/MiG ACE kit out from storage and cannot find the instructions to it. I checked Revell's website but didn't see it listed. Anyone know where I might be able to fin
...wings. The wings are 2 piece but the dihedral braces and joiner pieces are missing. I just am looking for plans/instructions so I can get this thing back in the air. I am willing to cover any cost ass...
... you attach the wing with rubber bands. There's also a display only landing gear, and a replacement prop. The instructions were vintage Estes rocketry, clear diretcions, step by step with profuse il...
I am in the process of custom making my first set of decals. In the instructions I have it says to clear coat the decals once they have been printed. Which clear coat works best ??? Thanks
...sails. Similarly could a raelly nice modeler out there literally send me by e-blindly mail the riggin and sail instructions from the Revell model? I would apprecaite it so much. Thanks Charlie...
...rucitons...She purchased it off E-bay. The packages were never opened...Can anyone tell me where I can get the instructions for building this model..I would appreciate any help......
...e. Before you know where you are you are on the downwards slope to treadheadism). The trouble is - all the kit instructions call for Humbrol Hu 114 as the best match for a modern-ish Russian Tank Gre...
I bought a vintage Airfix HMS Victory kit (1/180?) that was missing the instruction sheet. Can anyone help? A scan or a photocopy( cost reimbursed) would be much appreciated. TIA , Mack
Hi! I was just searching the net and came across this blog. Can anyone help me with instructions of a Revell 1/48 A6E Intruder? I seem to have lost mine since ive shelved this model for quite som
Anyone out there built this kit? I just got mine in the mail and it only has instructions in French! (The HMS Victory from Heller had both English and French). Did I just get a box that was missin
I recently purchased the Revell Cutty Sark 36" model marked H-399. It had no instructions. The Revell site has no instructions for download. Where might I locate a set of instructions. It is way to co
...as I was shooting clear thinner, the mix kept 'thinning' until only air was shooting throug the brush. Per the instructions, I again disassembled, cleaned (everything looks in good order), and cannot...
...to make placards, visible inside all Humvees - it is a pity that no decals are included for these. 10-step instructions printed on both sides of a single letter sized sheet are very clear, but on...
...completed kit detail on sides. Packing: Heat sealed cellophane. Decals in small cellophane bag for protection Instructions: fold-out single sheet, clear print on crisp white. No references to specif...
... by academy hobby model kits) In the whirl of the holiday season..and the crazyness of our parent's house, The instructions have disappeared. Is there any way to get a hold of them?? I looked on the...
...it: The kit comes bagged in a heat-sealed polyethylene bag and at first glance looks clean and crisply molded. Instructions: An annoying bundle of folded pages (unstapled) on greyish recycled paper, ...
...got one recently, it needed a replacement gas tank but otherwise is in working order. However when I follow the instructions Hornby provided to the letter, it steams, smoke come out the chimney and no...
I have got a sig smith miniplane but no plans or instructions. Could any of you tell me where the C.G. is supposed to be located as well as the control travels (dual rates as well) that the book, or
I managed to score a Flair SE5a kit of a friend. Its only missing the instruction manual. Has anybody got the manual and are they prepared to scan and email me a copy??? also, any tips or modificatio
I recently bought this kit off Ebay & it has come with only Japanese instructions. Does anyone know if it is possible to download English instructions from anywhere?
... there is a Monogram kit of of a Piper Tri Pacer. I believe the aircraft is complete, but the figures that the instructions say should be there are not. One fuselage side has been sprayed red. The de...
Does anyone have a scan of the paint instructions for the 1/48 scale B-58 with the South East Asia camoflage and markings? I already have two of these kits from the Monogram issue and really don't w
...ttle bitty standard square bottles. And hobby/air brush thinnner. The ratio I used was 1 to 1 as per the model instructions. The model itself is your standard styrene car plastic body. I laid dow...
I have just opened a packet of this stuff - its in a blue box covered in Japanese - and no english instructions. The diagram seems to indicate that equal amounts of each Part A and Part B must be mix
...its of the WWI fighters. Molding on both is very crisp with no flash at all. All the parts are there, including instructions and decals (which do not appear to be yellowed, despite the age of the kit)...
Im after the instruction booklet for the Tamiya 1:12 Ferrari 312T that was originally raced by Niki Lauda and Clay Regazzoni in 1975. I will of course pay for any postage..........
English building instructions for rewound cd-rom motors: http://www.id.ethz.ch/Homepage/korosec/privates/ae/motoren/electric/cdrom/ -> Elektromotore -> CDROM "Flight Engine" More cd-rom threads/links
...non-r/c 0.061 engine. I'm having difficulty getting it to run - in fact I've never go it to fire at all!. The instructions on my (new) power panel say to remove the glow head, connect and earth it, ...
...ls and a 2 piece canopy for open or closed display mounting. Parts were cleanly molded with very little flash. Instructions were clear and in 5 steps (not terribly many parts. I started off by check...
Page: 12

Copyright © 2006 - Jan 2009 Models Buzz