motor  
...ain set. I have tried it but it doesn't seem to want to work. Putting the voltage directly onto the motor brush connections results in a very rough and erratic motor turning slowly. So I assume t...
Hi, I have a ice skating scene that has a small motor. The skating figures are helf in place by a magnet. I have a motor#. Wondering if a new motor can be put in it's place?
WRF500TB-12560
Anyone know if it's possible to get spares for Mashima Electric Motors ? The reason I ask is I recently bought a kit built Westward Drummond T9 4-4-0 fitted with what looks like a M24-F motor. Wh...
I have a peco turntable with a motor that is supposed to turn the table. the motor has a worm gear driving the cog on the center post.
The problem is that it shifts the lines so that they are not par...
...a prototype of a car that i want to build and i was wondering where i could find a small battery powered motor for a 1:24th scale car and how i could rig it up so a wind tunnel could charge the batter...
I need a chart to show what size electric motor can replace a nitro motor. Is there any such chart or graph available?
...n.gif
Two better inrunner animations, the controller uses sensors but that makesno difference to the motor itself. You can step through the sequence or maximise your window to get the speed down: ...
How can I remove the worm gear from a Triang X04 motor
what size electric motor is comparable to a .60 nitro engine?
I just installed a peco turntable and motor kit from Frizenhall, and it is a little jerky, and turns on a bit of a slant, plus it is really noisy... Does anyone have any insight or suggestions? please
what size electric motor is equal to a OsFs-52s
Would Hornby's R8249 be able to the current of the X04 motor which is 0.25A.?I would like to put in in my R253 Dock Shunter.
What size brushless motor do i need to operate the Ultimate Bi-plane from horizon hobby? It calls for a 40cc gas engine.
i need to set my lowend on my 32sx motor thanks for any help.
i have a mashima motor 24-12 needing brushes can i buy replacments
Would the Sapphire Decoder be compatible with the x04 motor? Or would a more powerful decoder be necessary? Thanks.
Is it possible to counter balance an over powered motor by adding weight? I just bought a new Plymouth DDT industrial switcher that runs ridiculously fast, and I was thinking that maybe weight would ...
Can anybody tell me how can i mount stepper motor on the joint of robotic arm??? and which other necessary supporting elements are required for robotic arm.
plzzzzzzzzzz rep soon
...ight? Price is about $50. Triple that is $150. Except that I can get similar performance out of a $10 motor. If the $10 motor can't do it, a $40 cobalt motor certainly will.
Actually for a...
I wouldn't recommend adding extra weight, it will put extra strain though on an already struggling motor causing heating of the motor coils due to higher currents being drawn by the motor under h...
It call for na .10 nitro motor I want to use an electric motor I have no clue about electric motor as to what size and what ESC. % battery to use. I dont want a rocket ship a slow flyer would fit the ...
Thanks, Doug. The motor I plan to use is a geared brushless and I don't think it needs to be re-timed?
Perhaps I should have concerns about cooling the motor since the air will not be blown th...
...n't remember why I purchased it, but it was before my
R/C days.
I've noticed that electric motors are quite cheap in comparison to gas/glow. As a result, I'm considering building t...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=2480711435
English building instructions for rewound cd-rom motors: http://www.id.ethz.ch/Homepage/korosec/privates/ae/
motoren/electric/cdrom/
-> Elektromotore
-> CDROM "Flight Engine"
Mo...
It sounds like the motor isn't quite meshing with the drive gear, have you got the correct worm on the motor and does it feel tight when turned over by hand, if the worm is correct is it either t...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in detail [
why?
]
Sponsored LinksLatest Posts
|
