problems
I've only had the live steam set for a few days but have already ran into problems and found their solutions. This is a superb set but complicated and
I can imagine that others may run into simi...
Is anyone else running into problems with the fragility of the Hornby decoders? I was wondering if it is a general problem with them or did I just get a lemon?
Hi Guys
I am having problems with logging into the forum, having forgot my password, I deceided to get it resent, but the security codes aren't working properly.
Regards
Paul
...ush? I bought it last fall on sale at a store that was going out of business. I painted one model without problems until the very end when the paint began to splatter really bad. I disassembled, cl...
... this i have been using aztek airbrushes for years i bought this airbrush on may 5 09 and i am now having problems with it now is any one have the same problem i am having or can any one help me wit...
Hello, I tried airbrushing for the first time under the advice of my local hobby store. I am using Testors cheapy air brush, and it worked just fine. Paint laid down perfectly and looks perfect.
...
Ok.. its me again..Amatuer airbrusher..
I am having trouble getting paint to not peel up when using masking tape or liquid mask. I have been painting using Tamiya Acrylics thinned with Windex.
Ap...
I have been getting very small specks of what appears to be some kind of contamination when I spray with my airbrush. It does not happen all of the time or consistently during a painting session It is...
Hey everyone, I'm a newbie at painting so i hope this questions isnt too easy to burn. I'm having a bit of trouble finishing up my project!
I've just painted plastic with Krylon fusi...
both my vl andbadger are spittin water and as soon as i put my hand infront water runs though for a short period of time then it stops , only air runs
tried switshing compressor same
...to fit but that's not too bad. Sooo looks like I can recover from my major screw up with out too many problems. Sounds like you really know this kit and how to go about assembling it. Any othe...
...ing from a curved rh turnout onto a long crossing. The turnout is insulfrog and the track 100. There are no problems crossing all other turnouts but it appears that the wheels are shorting on the frog...
...s one has more options with the mounting. However one can get the muffler too snug on the inside and create problems that will be attributed to the carb. With the alum. tube too close to the muffler w...
...t part of the year in which to reply to all concerned.
Neither he nor other's showed concern for my problems and/or ill health....or indeed the problems of other's who gained pleasure fro...
...ecommend a decent Saturn V kit? One that is well detailed and that also fits together well with no assembly problems....
...hoosing track - Code 100 or 75?
I know that 75 looks a lot better, but I also know that some models have problems running on it. At the moment, the layout's 'fleet' is as follows;
...
...nother modeler I know. The other side of the coin is that, at best, these kits exhibit not only the sort of problems you expect with many short-run products, but also problems that can only be attribu...
No problems, I will scan photos tonight and send them as soon as I am done.
rewally? built my Ex stock. just flew it on a F21 (or was that my maxi clone?) So far no problems.
I have had similar problems with polly paints clumping straight out of the bottle.
Any chemists out there to explain why it's so hit-and-miss?
...lly it will grow on to a community that we will enjoy spending time at, feel free to register and post your problems, tutorials or anything to give the site a bit of activity....
Did you balance the prop? A lot of vibration problems are tracable to unbalanced props.
I am interested in the ZTC DCC systems. I sthere any problems and have anyone bought one recently.
... flextrack, and will be running Digitax and diesel engines on it. Is there anything I should watch out for? Problems I am likely to encounter?...
...
Yes there is a chance of scratching and wear to the railhead, but only with time, pointwork could cause problems....
...inal Enterprise offering yet, but those Bandai Star Trek kits don't have any nacelle fit or durability problems....
...ersion we were working on, hopefully you like it
If you have any feedback about it (colors, functionality, problems, etc.), please let me know, and I promise to do my best.
Thanks,
The Administra...
... heard from the bogies.
Does anyone know what the sounds would indicate and How i could fix it? (I have no problems with the locos that I am the first owner of)...
... forum I hope you will like it here.
As far as I know acryl dull and gloss coat don't produce any problems (but perhaps a member having personal experience with this will react soon just to ...
I tried airbrushing Mr. Surfacer 1000 tonight and ran into several problems.
First of all it dried in and clogged the tip of my Paasche H airbrush even with the tip almost wide open. Secondly, when i...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in detail [
why?
]
Sponsored LinksLatest Posts
|
