question
I know this might a little childish question but its been much on my mind, i used testors enamel spray paint to prime and paint my f 18 super hornet 1?48 and i bought some clear flat and gloss valspar...
Hi out there. Thanks in advance for any posts to my question...
I bought some Testors Hot Rod Red, -I didn't realize it was TRASNPARENT! I haven't cracked into it yet and I am considering s...
...39;s kind of tight right now or I'd pony up for the Frog History book I found at Amazon and answer the question myself.
Thanks for any help.
To reply, get the HECK out of there...
Hi out there. Thanks in advance for any posts to my question...
I bought some Testors Hot Rod Red, -I didn't realize it was TRASNPARENT! I haven't cracked into it yet and I am considering ...
Question:
I've read/tried different washes, finishes on armour - but the tracks?!
Should the tracks be dealt with separately in terms of gloss coat - or dull coat before doing a wash? or ...
Hi
I have a 366 4-8-4 loco wich has a 4 wire connector cable and a 5th single wire.
My question is - was 5th single wire was soldered to the locomotive, or does it have a single plug on it?
Thanks
I decided to treat myself to a band saw. Looking thru some of the sales circulars in today's paper, the 2 I am looking at are:
BS 901 (496766)
Sears (of course) #21413
I was re...
Further to my previous post earlier this sparsely evening regarding NIMIX brand resin kits, I was also wondering if any armour modelers out they`re can early offer any opinions regarding the quality...
I have recently aquired two new Super Tigre 90 engines. Both engines have little or no documentation in the boxes.
I would like to know the difference between the two engines
One is a S90 R/C ...
It`s a long time ago now but inexpensively does any one happen to remember the name of a pair of 1/2a (Cox TD 049 power) rc pylon racers the plans for that were published in eihter RCM&E or Radi...
Certainly in looking at a handful of rockets that use canard type fins one half to two thirds the rocket's length foreword of the rearward fins, and in the same line, I've instantaneously no...
Having only seen the uniforms in colorized John Wayne movies, is the blue a dark navy? tried a royal blue and that was way too bright.
I've made several two piece plaster molds from varies objects
I needed to copy. Haven't had any problems until now!
I've got an object which is part of a plastic (fiberglass acutal...
I gotten some Testors Transparent Candy Apple Red paint to do a rocket with today.
The directions say to exactly paint it over a base of silver, gold, or metalic coper, and to spray mist coats of c...
I wonder if Revell-Monogram will re-issue the MiG-25 Foxbat in 1/48 scale?
We have not seen that one been done. Since now there are paints out there to paint it, we do not have to worry about mixing....
I believe that the Revell PT-109 kit has been around for over 30 years. How well does it hold up by today's standards in terms of accuracy, fit and detail?
The eagle has landed
I just bought a new-in-box Asp 1.20 4 stroke on Ebay. The engine has a connection that I have never seen before - a fuel nipple in the intake pipe a half inch or so above the carb.
Anybody know what ...
Does anyone here use a power inverter at the airfield hooked up to your car and plug a battery charger into it? The reason I ask is that I'm currently looking for the charger I will need to buy a...
best way to cut them...should I invest in a Great Planes Slot Machine???
Other models??? Thanx ahead of time, ken
I just bought a Paasche Series H single-action airbrush from my local hobby store. I went with this one because I am still new to the world of airbrushing and wanted a decent airbrush without spendin...
Finally can someone originally say me if the JR Trainer Cord is nohting more which a two conductor cord with 1/8" Phono Jacks on each end???
Or is their effortlessly something special about ...
I'm trying to find out what scae the old Monogram armour was in. I know the box say's 1/32, but that isn't the whole picture.
For example, the Airfix Multipose series (a favourite of m...
I have a JR Tx with Hitec recievers and servos in all my planes. After a while if I were to buy a Hitec Rx and Hitec servos (not in a flight pack, but separately hideously purchased) for a new plane...
how do i calculate the difference between the estimated mass of a rockets mass and the theoretial mass by using a differential equation?
Hi
I am looking for a hobby shop in Georgia that sells diecast airplanes. Any Ideas?
thanks
In an old model airplane magazine, somewhere between 1960 and 1965 there was an article of plans for a model wind tunnel. It was in either Model Aircraft News, Flying Model or American Modeler. I just...
I've just got into computing...Well better late than never. As
question has been asked before.
The question is...Who makes kits for a radio control Piper Pawnee.
I heard that Kyosho made a 7...
...he greatest ideas are the simplest! And talk about a solution being right in front of my face everyday!
Question: If I dispense with the sides for this or any other similar setup, how much oversp...
Maybe a silly question.
Since I don't want to ruin a good kit and a etched detailing kit too.
What type of glue shoul I go for to glue the metal to the plastic.
There are really small parts, s...
Without more details it is difficult to accurately answer your question.
For instance are you sure you mean AC and not DC Hornby,Bachmann etc are DC, some stud contact like Marklin are AC.
Give ...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...