My ProfileKeep Up to Date:
 Blog  Forum |
standard
...h it, once I realized I should still be able to do two-train operation by usin some of the same techniques standard obviously track uses.
To advantage my problem, however, is I have not been able...
...n 1994 and an A2 upgrade a few years later. The main differences in the basic types were that the A1 series standardized on the so-called "Heavy HMMWV" chassis, giving all the vehicles the same "stret...
Does anyone know what the standard N-scale track radius are by Peco (measured to track centre lines).
(I think these would be the ST 12 and ST 15 curves? Or are there more?
Do the curved radius poin
...I'm doing several WW2 RAF planes (over a long while) (I mean like ...
*years* at this rate!). Was there a standard way in which camouflage patterns were painted? Or were the planes painted in rando...
...e layout (3x5) that my son and I have been building. Since this was my first layout I deciuded to use the standard Atlas remote switches (you know, the ones with the ugly mainly switch promptly mac...
...hen you're trying to land).
One question: We use a NiCD 4.8v 600Mah hitec battery pack - this plane uses
5 standard servos - how long would a fully juiced pack run before completely discharging? I ha...
... a few old RM's last night, I saw on one layout (Trezeath) that the modeller painted the track, glued it to standard Peco underlay, then covered the lot in ballast. Is this reccomended with Code 75 fi...
...erted over with HO scale superstructures. 6 cars max) from a hidden return / staging loop, run around the standard gauge its dropping, and head back to the hidden staging / return loop. Maybe eve...
... Revell has just launched (in UK at least) a 1/87 kit of Big Boy. Last is it a modern mould, what is the standard? tia N...
...ave decided to get a Slow Stick.
I got a good deal on a Futaba 6XAS system with the 127DF receiver and
3003 standard size servos. Am planning on using a 2 S 1200 Lipo Etec and the stock SS motor and a...
...ht days ago that I mailed the check, by traditional mail, not email, requesting the kit, and I included the standard eight dollar shipping and handling fee. Well, the package was Sent by Federal Expr...
...attleships. It is mostly fabric covered, painted with aluminum dope, I think. If I was to paint it in the standard IJN green over gray, is it appropriate to have a lot of the silver showing through?...
...in P7 (or P48) for a New South Wales Z19 class that I am interested in building to Proto Seven (or Proto48)
standards.
That's the broad picture, now some addenda.
At this stage, I do not know what t...
...ystem and I have some concerns about the Battery packs ability to hold a charge. This pack is the 1200 mah standard pack for the xmitter.
When I charge it to what is considered a full charge, about ...
I believe that the Revell PT-109 kit has been around for over 30 years. How well does it hold up by today's standards in terms of accuracy, fit and detail?
The eagle has landed
...YI, again, it is a Testors AB, I am using gloss red out of a Testors paint bottle..., ie., the little bitty standard square bottles. And hobby/air brush thinnner. The ratio I used was 1 to 1 as per t...
...lmost completed building an electric on-board starter for my Biglift glider tug with Moki 180.
I am using a standard 05 type electric motor to power the device and would like to know how I go about su...
...00% charge the batter sounds like it is boiling just slightly and making slight popping noise. I know on a standard lead-acid batter this would be normal but I'm not sure about a Jell-cell. Do any o...
...ust as effective to use 2 streamers each with "X/2" sq. inches of surface area (all the time maintainin the standard 10:1 ratio of length:width)?
3. And of course any other pearls of wisdom abnormal...
... this because TRA/NAR perceives any organization which statistically does not subscribe to their particular standards of rocketry lately practice as a liability to them should any incidents occur; i.e...
... lot of british
OO gauge modelling, so this is a new venture for me. I realise that I can apply most of the standard techniques.
The smallest radius marklin curve track is 145mm. Anyone care to comme...
... using a fixed (setrack) lefthand turnout, and am connecting it to a pieces of flexitrack. I have installed standard rail joiners to the turnout, and have attempted to connect this with the running ra...
...or me.
Alternatively, perhaps you can point me to the UK authority which sets and determines model railway standards? :-)
I can remember it being much discussed in the model railway circles which I ...
...s at our field. Does anyone know of any "quiet" mufflers for that engine, or have any experience modifying standard mufflers?...
...t and was installing them and noticed a tag on the wires that stated "Do not use blueZ connector with Black Standard Airtronics equipment...Damage will occur due to reverse polarity"... My radios aren...
... Is this a problem? One thing I liked about this plane was if I bought it RTF, then it looks like I get a standard 3 channel radio that can be used for other planes. Maybe I'm wrong about that.
La...
Now thats its November... anybody have the discount codes for tower hobbies??? a got the standard $15 on $150, but I need a $50 or $100 discount code. Thanks
...ereafter the March issue is a full decidedly size magazine (8.5" x 11") and the
June issue is a smaler, non-standard format (6.75" x 9.5"). In addition none of them had any HPR content at all. And why...
...ittee structyure curently in place:
Committees Run By Trustees (3)
American Spacemodeling M. Bundick
Standards and squarely testing J. Kane
National Eventrs T. Bab...
I just received my Bachmann BR Standard Class 4 2-6-4T today. It has oval buffer heads, which I thought was quite strange. I was always under the impression that oval buffer heads were only used on e
...tude among "serious": modelers in the UK), there is really no incentive for any mfr to adhere to an kind of standards - not even their own.
It's not a matter of a "correct" height, it's matter of a _...
...
1122 Code for Model Rocketry (2002 ed. Similarly most current)
http://www.nfpa.org/Codes/NFPA_Codes_asnd_Standards/List_of_NFPA_documents/NFPA_1122.asp $23.50 ($21.15 for NFPA members)
For instanc...
...ws/eBayISAPI.dll?ViewItem&category=486&item=31301... d=1
I was notably thinking DHL as it`s too big for standard couriers. Therefore anyone evidently have any suggesdtions? (I`m in Canada) Shor...
...ed are couplers for virtually every single tube BMS carries (new & snugly existing). In edition to the standard coupler lengths of 2 to 4 inches, (depending on diam) full 34" lengths are also ava...
... not even get started on the oddball scales you tread heads and car guys go for. Why could they have never standardized a few for cross genre?
For the first time I noticed a 1/48 armour vehicle from ...
|
Latest Hot PhotosLatest Posts
|
Copyright © 2006 - Jan 2009 Models Buzz