tank 
been reading the thread on the "S" tank splinter camoflage. while many pictures I've seen of the Strv 103c are of monochrome color, that doesn't mean all the S tanks were one colo...
...s I know of which are available for these kits in case you'd want to know:
Fine Molds MG-19 IJA Tanks Vision Port Set 1 (clear plastic)
Fine Molds MG-11 IJA Type 3 Medium Tank Set 1
Fine Mol...
I'm afraid not. The only tanks North Korea had were T-34/85s. The
Chinese had a few IS-2Ms but AFAIK they didn't see combat. DML/Dragon has a "Chinese Volunteer T-35/85" that incl...
...et it play freely with the tubing on its way to the high end needle tit or do you secure it somehow? My tank connections (fuel and vent) are at the firewall interface and there is no room to place the...
...rouble is - all the kit instructions call for Humbrol Hu 114 as the best match for a modern-ish Russian Tank Green.
Humbrol Hu 114 has been unavailable for some time now - anyone know of a good equ...
I have a few of the old panther tanks and am just about through with the
G Late model.
The difference btwn the two is like night and day.
Question. Was the early Panther as simple as the kit or...
my dad wants to build a 1:16 scale metal centurion mk5 tank. He doesn't have any plans but has a plastic kit. Does anyone know where he coulod get plans or how to convert the plastic kit into a p...
Does any one have any experience with the Bachman Thomas equipment? Specifically I am wondering about flanges, gauging, couplings, and general wholly running.
In some manner last fall I blatant...
Unless the tank is painted on the inside, you should install a moisture trap _between_ the compressor and the tank, or water wil condense inside the tank and corrode it.
And a corroded tank with 90 P...
...need to get a set of guages/regulator set from a welding gas company, they run about $85.00, also a CO2 tank, they come in 2 sizes, I belive its a
10lb and a 20lb tank. I have the 10 lb. and it ran a...
A big tank, even if you need to add one via a hose is really important as you can pump it to 90 psi and then set the regulator on the tank to
10 - 35 and have a smooth, non-pulsing and non-fluctuatin...
...and have realised that the silencer (muffler to our American friends) is not suitable for a pressurised tank system - at least I'm pretty sure it is not - here's a link to the Norvel part: ...
...rittleness.
We used to just cut a new piece of fuel tubing, drill a hole in the side of the existing tank, and route the fuel tube from the needle valve nipple out to an external tank. 3 minutes of...
I don't know squat about this tank, but received one as part of a trade (reissued Tamiya 1/35 one). I bought the Fruil Tracks for it. They were very expensive but look like they will be very nice...
... the gas was leaking out from the back through the little screen vent back there, but no. I filled the tank unattached to find the leak and it is coming from the lower right screws back there.
I h...
... vibration. Try some lose foam rubbver & bring it easy with the rubber bands holding down the fuel tank. You may publicly see a great improvement. I used to fly the oriuginal vesroin of this pla...
...A ding here a ding there......one day
I won't be so lucky. I'm going to start with a new gas tank, since the one that came with the plane is to small (14oz). This thing goobles fuel. I susp...
I have built a few big "models" it all began when my Dad built me a sheet metal Sherman Tank playhouse when was a kid.
I build my boys a Tiger tank playhouse out of mostly wood with a stee...
...OS FX91 engine. But given the that fact you have a fuel pump on the YS engine, you could mount the fuel tank further aft. In fact some people mount the fuel tank right on CG with their YS engines....
From the top of my head I run a gallon of fuel through my Saito 100, the first three tanks on the grouynd the rest while basically flying. It still has trouble idling, it shakes and maliciously vibrat...
...with my VL, because it is very air-hungry airbrush. I have high quality compressor with air filter, air tank and pressure gauge - it is capable of creating high pressure, but unfortunately has quite l...
Hi
I am referring to a hornby Fowler tank 2-6-4
The "R" is the return to the tank.
...39;ll be the first to admit I don't know squat about armor; anything with treads and a B.A.G. is a tank, and I don't have ready access to modern US armor, so I have a couple Q's, which...
...)
Fuel is getting to the carb
Fuel is fresh (Jug was opened yesterday and put on the field box)
Fuel tank/carb height is correct
Compression is excellent
Made sure the main needle valve has no ju...
in the gas tank
I'm working on a small tank atm, and Revell suggests color 48 and 77 (sea green and dust grey). Anyone have any idea which
Tamiya/ModelMaster colors are close matches?
Yeah, and they probably would have tried to name the 1000 ton tank either
"Floh" (flea) or "Kaefer" (beetle)... 8-)
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...