track

what track types do i need to make a figure 8 E-Z track i ha...
what track types do i need to make a figure 8 E-Z track i have
Ballasting Peco Code 75 Track
...opefully tomorrow, as I've got Thursday off), I'm wondering how I'm going to ballast the track on my new layout. I was rather suprised to see that finescale flex-track has no holes for...
can you use black ez track with nickle silver ez track (gray...
can you use black ez track with nickle silver ez track (gray) together (Both made by bachmann)
Track base/underlay for N gauge layout
I would be grateful for some advice about a track base for my son's N gauge layout... 1. Is a base really necessary or can I stick/nail Peco track directly onto the MDF baseboard? 2. If a t...
peco track geometry (n scale)
Does anyone know what the standard N-scale track radius are by Peco (measured to track centre lines). (I think these would be the ST 12 and ST 15 curves? Or are there more? Do the curved radius ...
I am looking for information about system six track. I was w...
I am looking for information about system six track. I was wondering if it would be compatible with today's track, power supplies and loco's, or would I need to make some adjustments.
What do you clean your track with? I have been using brite b...
What do you clean your track with? I have been using brite boy and goo gone, and was wondering if anyone here used a track cleaning car?
Double cross over with Atlas Code 08 track
Hi I intend making a double crossover with the Atlas Code 08 track. I was wondering which track would work best, and which turnout number I should use?
Sample HO Layouts For Simple Track Types?
... should still be able to do two-train operation by usin some of the same techniques standard obviously track uses. To advantage my problem, however, is I have not been able to systematically fin...
will a bachmann train run on a hornby track
will a bachmann train run on a hornby track
can anyone recommend a DCC track cleaning vehicle? Thanks.
can anyone recommend a DCC track cleaning vehicle? Thanks.
I want to leave my bachmann e-z track outside. Can anybody t...
I want to leave my bachmann e-z track outside. Can anybody tell me how to care for it like rain, dust, wind, etc.
Older Hornby locos on first radius track
...ust acquired (R311), or any other older model for that matter, is suitable to run on Hornby first radius track? I don't want to damage my Locos....
N gauge template?
I think the availability of track templates varies depending on what type of track you are using. There are several track planning programmes available which come with databases of many different t...
Is there software I could use to design a track layout?
Is there software I could use to design a track layout?
Can wiring & ops for 2-track (DC power) train "balloon" (a/k/a "Turnaround") be simple?
...me for the turnaround at the end of a spur that enables any train to turn around, if there's enough track provided -- it's called a balloon. (Like the speech balloons in comic books.) I...
Can you use a hornby controller on bachmann ez track ?
Can you use a hornby controller on bachmann ez track ?
How do you build a figure 8 layout with Bachmann EZ track?
How do you build a figure 8 layout with Bachmann EZ track?
hi I'm new to model trains and am currently laying track cou...
hi I'm new to model trains and am currently laying track could some one tell me how a crossover point works many thanks.
will a hornby train run on a bachmann EZ-track
will a hornby train run on a bachmann EZ-track
Does anyone have the wiring diagram for an 80s Relco Track cleaner?
Hi I dug an old Relco track cleaner out of the attic but seem to have lost the wiring diagram. Can anyone help me out, or point me in the right direction? Thanks
How important is it to have a cork base when laying a track?...
How important is it to have a cork base when laying a track? If I dispense of it, what would the consequences be?
I would like to make some areas on my track look wet, and al...
I would like to make some areas on my track look wet, and also replicate an oily ballast, where an engine had supposedly sat for a while. Any Ideas on how I can do this?
What is the best material to lay your tracks on and how to y...
Foam underlay or cork are about the best underlays. Track is pinned down using track pins. The track is laid down unpined first, then the underlay fitted underneath the track and cut to size as requ...
Best source for Peco flex track?
I live in Birmingham and I am looking for a source for Peco OO flex track. I need six 3' lengths and I would like to find the best price in the UK including postage. I would prefer Finescal...
Looking for CN Track charts of the Fiver Sub for a CTC simul...
Looking for CN Track charts of the Fiver Sub for a CTC simulation. Thanks for your help
I want to buy a lot of track, preferable the Peco code 100, ...
I want to buy a lot of track, preferable the Peco code 100, and am looking for a deal because I need quite a lot of it. I can't seem to find online sources - can anyone point me in the right dire...
Which track would stand up to a lot of mantling and dismantl...
Which track would stand up to a lot of mantling and dismantling? I will have to move and change my tracks regularly and was wondering what you would recommend as sturdy and strong tracks.
  More Topics...

The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz