My ProfileBloggers Wanted
We're looking for people to help with the main blog.If you are consistent, knowledgeable and you're into it, please drop me a note. |
version
... 362
Meidum sea gray 363 aircraft gray green 364
I found the conversion charts but hte colours they seem to convert to don't really look like the colors in t...
I'm desperately searching for the Meteor Productions Cutting Edge Resin ski conversion kit for the Testors/Italieri 1/48th scale C-130 kit. I just invested $70 for the C-130 kit and missed out on the
...separately for you to fit). Unfortunately, the tail-light mountings are too narrow and lack detail. Lima's version is much better.
12) The sprung buffers seem to compromise appearance for function.
S...
...180 by by just using some 62 leather with a drop of 73 wine?
Is the pale blue close to or the old Humbrol version of RLM 76 blue?...
...otwithstanding the usual comments about Lima stock I'm looking to buy one or two Class 52s/Westerns.
Lima versions are still available new and second hand, Hornby also have them in current production...
PRE-Flight version 2.10 is now available. This new version features improved ground contact physics and improved aircraft physics, plus speed, graphics improvements, and miscellaneous other fixes. Fre
... is the antenna for the SST-181X rendezvous beacon. The Tamiya Phantom was first released as an F-4C or D version. On the F-4D, the SST-181X antenna was mounted on the aircraft centerline as you see...
...(resin) $10
Squadron Hawker Hunter Vacuform Canopy $3
KMC Hawker Hunter F.6 Cockpit Set (resin) $9
CONVERSION SETS:
Cutting Edge Beaufighter Mk.X Fin and Rudder $8
BOOKS:
"Mig-15 - Design, De...
...ake a set of gear for a don smith B-29 cause I can, and cause
I don't wanna pay $650 for the century jets version.
I just don't want to re-invent the wheel (pardon the pun!) trying to develop someth...
...ssian tank off to the side.
Pershing and a T-34?
Any of the 1/35 Trumpeter tanks?
Isn't there a Russian version of the Sherman out now? Was there ever a
Sherman/Sherman battle?
Hardest part is go...
...use my Wizards of the Coast Star War Minis Collection to represent dismounted pilots, and there will be conversion involved on them as they don't actually make most of the pilots. I'm going to scratch...
Today someone asked me for plans for HO and N scale versions of John Allen`s Time Saver puzzle. The two links I had are now dead. Worse, they were the same two links that are commonly found in a sea
I'd like to get this classic to give as a gift. IIRC there were two versions, one larger and more detailed, even including a detailed captain's quarters. I checked at Squadron and saw there were two o
Hi everyone,
Finally we have update the site with the new version we were working on, hopefully you like it
If you have any feedback about it (colors, functionality, problems, etc.), please let me kn
Many years ago MRJ produced a table of conversion sizes between
Metric, Imperial, BA and drill number. Unfortunately I have lost mine along the way. does anybody know of a web site with a simillar tab
I've been making up the Maquette version of this a/c and what a nightmare!
The worst part about the kit is the undercarriage. _SO_ badly moulded it had to thrown away.
Can anyone recommend a suitabl
...a brand-new T-34 Model 1940 kit from Dragon Models Limited in Hong Kong. Sharp, precise, accurate and of a version not previously marketed as a ground-up kit (Maquette offered a "Semi-Conversion" usin...
... anything aviation, I wonder if anyone out there can point out the major differences between the Air Force version depicted by this kit and a Navy F-4J? Specific conversion points would be appreciated...
...gh_. Then there is that pesky problem of finding / fitting decoders into the bashed and mashed N scale conversions on the n30 side.) on the narrow gauge side. Wiring is standard block control with ...
...ng 8th Ace at US$16.99
1/48 Tamiya P-47D Thunderbolt "Razorback" at US$19.99
1/20 Tamiya M1025 Humvee NATO Version (a diecast metal & plastic military vehicle model) at US$69.99
1/12 Tamiya Yoshim...
...esterday at Hobbytown in Mobile. Man did they have the stuff...
The subject is a re-issue of the AMT/ESCI version. What a bummer. I have been looking at the real pictures and it does not comprehend w...
Star Trek fan club is selling a NX-01 Enterprise model (actually two versions, normal and battle damaged) for $US25 and $US35. Has anybody seen these models?
new Cutting Edge conversions and a new line of decals that will be out around or before the IPMS/USA Nationals. Check out the article at
www.cybermodeler.com!
hello i have a topflite giant mustang for sale arc version n.i.b. robart retracts mains only , complete air kit robart 600.00 ask for greg 613-821-3023 greely ont.
Im looking for some advise from any of you who have successfully converted a plastic model kit of an F-104 Starfighter jet in to a flying model rocket. Finally I bought a Hasegawa 1/48th scale F-104C
...t found
*any* U-2 drawings showing camera windows either! I did find some photos, and I plan to build the version with seven windows, changing from circular on the centerline to square on the sides. ...
...d demos of the real G2 addons??
I'd like to have them all but there are only a few "nice" aircraft in each version.
so i dunno which one is most price worthy..
I've been woundering: How does the Harr...
...per L-4, lemme know.
I'll be in the building shed to making a dozen or so detail changes on the 1/3 scale version I _was_ about to cover . . .
Fred McClellan
The House Of Balsa Dust
http://home.mi...
...CD-rom outrunner motor computer *simulation*:
http://www.meinpapi.de/dieter/JAMO_0-33Wi10Asmall.gif
Bigger version and colours explained:
http://www.meinpapi.de/dieter/JAMO_0-33Wi10Abig.gif
The cd-ro...
I have just finished a T.F. P-51 B version the 60 size kit not ARF. I have put a Super Tigre 75 on it and it sure looks small with the required 4" Spinner. Is the ST 75 enough engine for this bird or
...d out it's a Testors
Model Master FS Enamel Paint. What does the FS mean? I was going to get the Metalizer version. I didn't know there was more than one friggin gunmetal. Is the Metalizer version the...
...fast curing if repositioning is necessary. Is 'Araldite' a good alternative and, if so, is the traditional version better than the rapid? Any advice gratefully received....
...ed for this scale. The
PBY-5A includes markings for early 1941 Blue-Grey or the very colorful
USAF Rescue version; the DC-3 includes markings for Pan Am, Swiss Air, or an orange KLM bird. $10 INCLUD...
...mount, and other enhancements. This kit apparently can be used for either the US (e.g. Chinese and French) versions or the Commonwealth version, and includes sufficient parts for both.
The kits pro...
Real Flight G2 non interlink version (works with all windows controllers and buddy box USB interfaces) Plus all tools and updates needed for install.
Add ons 1 - 4 available also.
Provided on CD
|
Latest Hot PhotosLatest Posts
|


