wing
Hello boys and girls
I am about to start building a Telemaster Senior with its large wing and was wondering what changes others had made to produce a 2 piece wing for easier transportation (8 fee...
Does anyone remember the honeycomb/fiberglass coated wings that were available in the early seventies? The company's advertisement had a picture of the wing being supported at the wingtips with a...
The Hasegawa kit of this Luftwaffe Phantom F4-F has small wing fences on what would be the hinge line of each wing, these fences extend about
20% from the front of the wing they are also shown on t...
A friend and I have to rebuild a wing for his Telemaster Senior and I was just wondering if anyone had built a Telemaster Senior wing (or similar) using the 'Laser Method' where the wing rib...
I have been flying the ABC for a while now and have had this problem 3 times now
2 on brand new wings with no... let me say that again NO damage to them at all.
It seems that while doing an extreme ...
can anyone point me in the right direction for a balance point on a flying wing. Planform is similar to a Zagi...
cheers
Papa Sharptooth
Bouncing about the living room, my then three year old ...
I'm building a high-wing "stick"-type trainer of my own design. The
42" wing is of EPP foam, which seems indestructible, but also a bit more flexible than I'd like.
I...
I am trying to make the Wing zero model but can't figure out all find on the pdf how to assemble the twin rifle. Can anyone help?
how to fasten telemaster wing structs
I am looking for a low wing elecric trainer plan. Idealy between 45" and 55", that is easy to build and scale like.
Peter
What are the size of the two nylon wing mounting bolts on the sig rascal 40
Can anyone explain to me how the wing fold mechanism works on the ModelArt F9F-5? Thanks.
Morris is right. . .we didn't change the chord of the wing. We rebuilt it with barn door ailerons out near the wing tips. The owner had originally designed the wing (and started to build it) with...
My experience with wing bolts on trainers flown by newbies is that a cartwheel rips the top of the fuselage off with the wing. I've only had one plane, a GP Easy Sport, that survived a mishap re...
The whole ship is known as an X-Wing, B-wing etc. They refer to the fighter itself as that. Its the name of the model. I'm beginning to think this is the wrong place... Thanks for what help you g...
...g a Smith Miniplane which I bought as a half built Sig kit. Unfortunatly it did not have a plan for the wing. Can anyone tell me about the ailerons? The full size aircraft has barn door style on the b...
Moving the wing also places the motor and fuselage farther ahead. It only takes a little bit of this to change the CG (relative to the wing) a lot.
...h, 1 is the original issue with the Case XX win, the other is the Pro-Modeler version with the Case X wing. The surgically trialing edges on at the frankly wing at the elewvons on each subconsciou...
im lookin for someplace that sells the main wing for the right flyer 60h. i can find everything else but the main wing
...expert here, but I'll take a shot...
Intuitively, I think it would require more force to lift a wing than to drop one, so I would agree with the 7 up, 10 down spec.
If it's not specifi...
...ng for them and for asking your friend about it. I appreciate it. Did you build yours with the 52" wing or did you do a 50" wing? I was thinking of putting a 52 four stroke on it either that...
The RAF had 3 Canadair Sabre 2s and a lot of Canadair Sabre 4s.
They also had two wing styles, some being refitted in service with the 'hard' wing l/e.
Kit options are Fujimi, Hobbycra...
...from the bottom edge of the 1/4" hole to the flat edge of the piece that supports the front of the wing by the wing dowels. I can duplicate the parts by tracing inside the diecut opening, but no...
Are you putting an MVVS 1,6 petrol into a clipped wing Cub? Which Cub? I ask as I have a Sig clipped-wing waiting for workshops time and a new MVVS 1.6 to go with it...
...es that i bought to increase my mixing capabiltys. i want to fly a wild stick with it with a four servo wing. i'd like to use flaperons and then be able to fly in a crow configuration. i have fou...
My Waco has a Clark-Y airfoil. What makes this different from the other wing shapes?
I am looking for a balsa wood world war II model airplane p38 kit
with wing span around 20" or so to match the size of the other balsa wood airplane my Dad builds, his birthday is comming up soo...
I used Stixit once on a repair on my Sailaire wing, and it turned a dark purple-brown after a few months, presumably from exposure to sunlight UV rays. You could even see the brush marks. Looked lik...
...eens and no wheel pants).
Basic color cream and insignia blue checkerboard on rudder and under side of wing. It's time to think about recovering it as the rustoleum over coverite fabric is begin...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Models Buzz |
TIP: Write your question in details [ why? ]
Sponsored LinksLatest Posts
|
more posts...